Skip to content

Publications


  1. Israr, A., M.P. Cartmell, E. Manoach, I. Trendafilova, W. Ostachowicz, M. Krawczuk, and A. Zak, Analytical Modeling and Vibration Analysis of Partially Cracked Rectangular Plates With Different Boundary Conditions and Loading. Journal of Applied Mechanics, 2008. 76(1).
  2. Amin, M., S. Yuan, A. Israr, L. Zhen, and W. Qi, Development of cutting force prediction model for vibration-assisted slot milling of carbon fiber reinforced polymers. The International Journal of Advanced Manufacturing Technology, 2018. 94(9): p. 3863-3874.
  3. Anwar, W., M. Zubair Khan, A. Israr, S. Mehmood, and N.A. Anjum, Effect of structural dynamic characteristics on fatigue and damage tolerance of aerospace grade composite materials. Aerospace Science and Technology, 2017. 64: p. 39-51.
  4. Wattoo, K., M. Khan, A. Israr, and M. Amin, A Novel Study on The Effects of Minimum Quantity Lubrication and Machining Parameters in Turning of Ti-6Al-4V Alloy By Applying Al2O3-Graphene Hybrid Nanoparticle Enriched Cutting Fluid. 2021.
  5. Shoukat, A.A., M. Shaban, A. Israr, O.R. Shah, M.Z. Khan, and M. Anwar, Stability of nano-fluids and their use for thermal management of a microprocessor: an experimental and numerical study. Heat and Mass Transfer, 2018. 54(9): p. 2771-2782.
  6. Ahmed, I., A. Israr, and A.A. Baqai, Framework for Part Family Formation Based on Setup Similarity Coefficient. Journal of Space Technology, 2018. 8(1).
  7. Ali Khan, M., S.H.I. Jaffery, M. Khan, M. Younas, S.I. Butt, R. Ahmad, and S.S. Warsi, Statistical analysis of energy consumption, tool wear and surface roughness in machining of Titanium alloy (Ti-6Al-4V) under dry, wet and cryogenic conditions. Mechanical Sciences, 2019. 10(2): p. 561-573.
  8. Jaffery, S.H.I., M. Younas, M. Khan, and L. Ali. Energy Consumption Analysis in Turning Ti-6Al-4V alloy. in 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT). 2020. IEEE.
  9. Khan, L.U., M. Younas, S.U. Khan, and M.Z.U. Rehman, Synthesis and Characterization of CoFe 2 O 4/MWCNTs Nanocomposites and High-Frequency Analysis of Their Dielectric Properties. Journal of Materials Engineering and Performance, 2020. 29(1): p. 251-258.
  10. Khan, M., S.S. Warsi, S.H.I. Jaffery, R. Ahmad, and M. Younas. Analysis of Energy Consumption in Orthogonal Machining of Al 6061-T6 Alloy. in Advances in Manufacturing Technology XXXIII: Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research, 10-12 September 2019, Queen's University, Belfast. 2019. IOS Press.
  11. Khan, M.A., S.H.I. Jaffery, M. Khan, M. Younas, S.I. Butt, R. Ahmad, and S.S. Warsi, Multi-objective optimization of turning titanium-based alloy Ti-6Al-4V under dry, wet, and cryogenic conditions using gray relational analysis (GRA). The International Journal of Advanced Manufacturing Technology, 2020. 106(9): p. 3897-3911.
  12. Khan, Z., M. Khan, S. Jaffery, M. Younas, and A. Khan. Numerical and experimental investigation of fully-coupled and uncoupled finite element model for electromagnetic forming of Aluminium Alloy Al 3014. in IOP Conference Series: Materials Science and Engineering. 2020. IOP Publishing.
  13. Khan, Z., M. Khan, S.H.I. Jaffery, M. Younas, K.S. Afaq, and M.A. Khan, Numerical and experimental investigation of the effect of process parameters on sheet deformation during the electromagnetic forming of AA6061-T6 alloy. Mechanical Sciences, 2020. 11(2): p. 329-347.
  14. Muhammad Younas, M.K., Syed Husain Imran. Process Parameters and Its Effect on Surface Roughness During Turning Ti6Al4V Alloy. in Advances in Manufacturing Technology XXXIII: Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research, 10-12 September 2019, Queen's University, Belfast. 2019. IOS Press.
  15. Younas, M., S.H.I. Jaffery, A. Khan, and M. Khan, Development and analysis of tool wear and energy consumption maps for turning of titanium alloy (Ti6Al4V). Journal of Manufacturing Processes, 2021. 62: p. 613-622.
  16. Younas, M., S.H.I. Jaffery, M. Khan, R. Ahmad, L. Ali, Z. Khan, and A. Khan, Tool Wear progression and its effect on energy consumption in turning of titanium alloy (Ti-6Al-4V). Mechanical Sciences, 2019. 10(2): p. 373-382.
  17. Younas, M., S.H.I. Jaffery, M. Khan, M.A. Khan, R. Ahmad, A. Mubashar, and L. Ali, Multi-objective optimization for sustainable turning Ti6Al4V alloy using grey relational analysis (GRA) based on analytic hierarchy process (AHP). The International Journal of Advanced Manufacturing Technology, 2019. 105(1): p. 1175-1188.